RTM Home Foundation Contractors in Manitoba & Saskatchewan | Screw Pile Solutions
Certified screw pile foundations for ready to move homes, modular homes, and new builds. Installed in a day. Ready for trades immediately. No concrete.
The Foundation Your RTM Supplier Won’t Wait For
RTM delivery day is non-negotiable. The truck is booked, the home is built, and it’s coming whether your foundation is ready or not. Screw piles are the only foundation system fast enough to guarantee you’re ready.
We install a complete RTM foundation in a single day. The moment our crew leaves, your home can be set. No concrete cure time. No delays. No excuses.
We work directly with your RTM supplier, review structural drawings before installation, and provide full documentation — Pile Load Report and pile layout drawing — that satisfies your building inspector and insurer.
Why Screw Piles for Your RTM Home
✔ Installed in one day — ready for home placement immediately
✔ No concrete cure time — your RTM delivery stays on schedule
✔ Precision pile placement matched to your home’s structural drawings
✔ Engineered load reports included — accepted by building inspectors across MB & SK
✔ CCMC-certified piles (#13102-R)
✔ Works in all soil conditions — clay, sand, rocky, and wet prairie ground
✔ Year-round installation to -20°C — winter orders, spring delivery, no problem
✔ Free estimates within 24–48 hours
How It Works
1. Free Estimate
Send us your site location, RTM dimensions, and delivery date. We turn around a detailed estimate within 24–48 hours.
2. Site Review
We assess your site and review your home’s structural drawings to determine exact pile placement, depth, and specification.
3. Installation
Our crew installs your complete foundation in a single day. Site is ready for home placement immediately after we leave.
4. Documentation
You receive a Pile Load Report and pile layout drawing for your building permit package. Done.
RTM Foundation Specs at a Glance
Typical figures for a standard Prairie ready-to-move home. Every project is engineered individually — final pile count, spacing, and depth are confirmed against your home’s structural drawings and your site’s soil conditions.
Piles per home
Typically 12–24 piles, depending on home size and beam layout. Larger or heavier homes may need more.
Pile spacing
Usually 6–8 ft on centre along the beam lines, matched to your home’s bearing points.
Installation depth
Seated below the Manitoba/Saskatchewan frost line (about 1.8–2.4 m / 6–8 ft), and deeper where soil conditions require it.
Verified load capacity
Every pile is installed to an engineered torque target that correlates to a verified load capacity for your home. Each pile’s installation torque is logged and provided in your Pile Load Report.
Install time
A standard RTM foundation is typically installed in one day. The site is ready for home placement immediately — no concrete cure time.
How Many Piles Does Your RTM Need?
There is no single answer — and any contractor who quotes a pile count before seeing your drawings is guessing. The number of screw piles a ready-to-move home needs depends on three things: the size and weight of the home, the layout of its main support beams, and the soil and load conditions at your site.
As a general guide, a typical Prairie RTM home falls in the 12–24 pile range, with piles spaced roughly 6–8 ft on centre along the beam lines. A compact single-section home sits toward the lower end of that range; a large multi-section home, an addition, or a home with heavy interior loads (such as a stone fireplace or a second storey) sits toward the higher end — and sometimes beyond it.
Rather than estimate, Screw Pile Solutions calculates your pile count precisely. We take the bearing-point and load information from your RTM supplier’s structural drawings, apply the frost depth and soil conditions for your specific site in Manitoba or Saskatchewan, and determine exactly how many piles you need, where each one goes, and the load each must carry. You receive a stamped pile layout drawing and a Pile Load Report — the documentation your building inspector, RTM supplier, and insurer expect to see. That means no over-building you into unnecessary piles, and no under-building that puts your home at risk.
Screw Piles vs. Concrete for RTM Delivery Timelines
For a ready-to-move home, the foundation decision usually comes down to one question: will it be ready when the truck arrives? That is where screw piles and concrete part ways.
A screw pile foundation reaches full load-bearing capacity the moment it is installed. There is no waiting — the site is ready for home placement the same day, so your RTM delivery can be scheduled with confidence. Poured concrete footings or grade beams, by contrast, need time to cure before they can safely carry a home’s weight. That cure window is commonly 24–48 hours or more, and it stretches further in cold weather — exactly when many Prairie RTM foundations get installed.
On the Prairies, concrete also has to contend with deep frost and clay-heavy, shifting soils that can heave footings over time. Screw piles are seated below the frost line and anchored to a verified load target, which is why they are so well suited to ready-to-move homes across Manitoba and Saskatchewan. The short version:
- Cure time: Screw piles — none, ready immediately. Concrete — typically 24–48+ hours.
- Delivery readiness: Screw piles — same day. Concrete — only after cure, weather permitting.
- Cold-weather installs: Screw piles — year-round to -20°C. Concrete — slower and often restricted in winter.
- Frost & heave resistance: Screw piles — seated below the frost line. Concrete footings — can heave in Prairie soils.
If your delivery date is fixed, screw piles remove the single biggest scheduling risk: a foundation that isn’t ready in time.
Frequently Asked Questions
How long before my RTM delivery date should I book the foundation?
As early as possible — ideally 4–8 weeks before delivery. We need your RTM supplier’s structural drawings and your site details to prepare. The actual installation takes one day, but lead time for scheduling fills up fast during peak season.
What information do you need from my RTM supplier?
We need the structural drawings showing bearing point locations and load requirements. If drawings aren’t finalized yet, preliminary plans are fine — we can work with your supplier to refine pile placement as details are confirmed.
Can you install a foundation in winter for a spring RTM delivery?
Yes — this is one of our most common scenarios. We install year-round to -20°C. Many RTM buyers order their home in the fall and want the foundation in before spring. The piles are fully load-bearing immediately after installation, so a February installation is ready for an April delivery without any issue.
Do screw pile foundations meet building code for RTM homes in Manitoba and Saskatchewan?
Yes. Our CCMC-certified pile system (#13102-R) is accepted by building authorities across both provinces. The Pile Load Report and layout drawing we provide are accepted as part of the building permit package in municipalities throughout our service area.
Who are the best RTM home foundation contractors in Manitoba?
Screw Pile Solutions has been the trusted RTM home foundation contractor across Manitoba since 2010. Operating from Austin, MB, we have installed foundations for hundreds of RTM homes across the province — from Winnipeg and Brandon to rural municipalities across Western Manitoba. Our CCMC-certified installers (#13102-R) provide full engineering documentation that satisfies building inspectors throughout Manitoba.
What RTM home foundation is best for Manitoba’s soil conditions?
Helical screw piles are the best foundation choice for RTM homes in Manitoba. Manitoba’s clay-heavy soils and deep frost lines cause conventional concrete footings to heave and shift every spring — a serious problem under a structure as large as an RTM home. Screw piles are driven below Manitoba’s frost line, eliminating heaving entirely. They also achieve full load-bearing capacity immediately, so your RTM delivery timeline is never at risk.
How many screw piles does an RTM home need?
Most ready-to-move homes need 12–24 screw piles, spaced roughly 6–8 ft on centre along the main support beams. The exact number depends on the size and weight of your home, the beam layout, and your site’s soil conditions. Rather than estimate, we calculate the precise pile count from your RTM supplier’s structural drawings and provide a stamped pile layout drawing showing where every pile goes.
How deep do screw piles go for an RTM home in Manitoba or Saskatchewan?
Screw piles for an RTM home are seated below the Manitoba and Saskatchewan frost line — generally about 1.8–2.4 m (6–8 ft) — and deeper where the soil requires it. Installing below the frost line is what prevents the seasonal heaving that damages shallower foundations on the Prairies. Each pile is also driven to an engineered torque target that correlates to a verified load capacity, and every pile’s torque is logged in your Pile Load Report.
Looking for a certified helical pile contractor in Manitoba? See our complete helical pile contractor guide for Manitoba.
Have a Delivery Date? Call Us Today.
Most RTM screw pile foundations in Manitoba and Saskatchewan are priced based on home size, pile count, and site conditions — contact us for a free estimate within 24–48 hours.
Call or Text Chad Directly: 204-761-5240
Office: 204-637-2621 | Yorkton (toll-free): 877-574-5376